Gear Aid Aquasure FD Flexible and Durable Urethane Repair Adhesive & Sealant, the industry standard for maximum strength repairs to wetsuits, drysuits and all watersports products. The flexible adhesive with its safe and environmentally friendly toluene free urethane formula waterproofs, seals and also offers excellent abrasion resistance. Hundreds of water sport and household uses.
Aquasure FD urethane adhesive is the industry standard for high strength permanent repairs to all kinds of dive equipment. Instant on the spot or overnight repairs to practically all types of equipment: clothing, gloves, dive suits, footwear, boats, kites, waders, spray decks, luggage etc.
Gear Aid Aquasure FD adhesive provides a clear, strong and flexible finish for permanent waterproof repairs for use on most materials, including: neoprene, rubber, textiles, hypalon, PVC, polyester, nylon, polyurethane etc - does not bond to silicone coated surfaces. Urethane adhesive is the best for achieving maximum strength and durability. Full instructions provide helpful advice and how best to prepare surfaces prior to use.
Repair all types of gear failures with Aquasure FD. It’s a clear, waterproof urethane adhesive. After it cures, it becomes a flexible, rubber glue that is ideal for fixing outdoor gear that’s in constant motion. So, when fishing waders rip on the river or a wetsuit tears don’t throw it away with the help of Gear Aid Aquasure FD you can fix that tear. It’s also useful as a seam sealer. Don’t let rips, tears, and holes stop you. Patch it up with the all-purpose Aquasure FD and stay dry.
For fast cure, use with Cotol-240(TM) Cure Accelerator.
DIRECTIONS FOR NEOPRENE REPAIR:
Clean damaged area with Cotol-240(TM) Cure Accelerator/Precleaner or solvent
Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquasure FD to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.
Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Gear Aid Aquasure FD. Remove tape after full cure.
SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.
- Durable – Tough urethane repair adhesive bonds permanently to surfaces and dries clear
- Flexible – Cures to a stretchy rubber that bends with neoprene and other elastic gear
- Waterproof – Provides a water-tight seal that won’t peel or crack over time
- Abrasion Resistant – Keeps gear looking good by withstanding scrapes and scratches
- All-purpose – Bonds to all types of outdoor fabrics including: neoprene, rubber, nylon, canvas and vinyl
